[BIOS/Hardware Issue] CWWK 12th Gen N150-K Motherboard Powering on when plugged in
Officially repliedHello, I have recently purchased the CWWK 12th Gen N150-K motherboard. I finished building my NAS with it and upon plugging my power supply cable in the machine automatically booted up. I've set "Restore AC Power Loss" to "Power Off" in the BIOS but this behavior still occurs. Is this just meant to be like this or is there some way I can disable the automatic power on.
EDIT: Looks like the BIOS also cannot detect fan speeds for both CPUFAN and SYSFAN. Automatic/software control fan control in the bios has zero effect.
You may modify this option to enable or disable automatic startup on incoming calls. This setting takes precedence over the BIOS configuration. If this option is enabled, the function will be considered active even if disabled in the BIOS. When this option is disabled, however, the BIOS setting (whether enabled or disabled) will take effect.
- 12th gen n100 cwwk
- SleepModenotWorkingCWWK 12th/13th generationi5-12450H motherboard
- [Hardware issue?] PCIe slot completely dead — no NVMe, no network card detected — CWWK U30
- CW-NAS-ADLN-K Powers Off in Bios
- Is SRIOV Supported on CW-NAS-ADLN-K - N150 CPU?
- Informations on CWWK mini ITX motherboard
- CW-AT-10G-8P-N150 stability issue
- [Seeking BIOS / SPI Dump] CW-N300-NET Rev 1.2 — System Unstable / Crashing under OPNsense
- Key Hardware in Building an Energy-Efficient Unraid Server
- Informations on CWWK CW-NAS-MTL-10G 14th Gen Ultra 5 125H NAS Mainboard
- [CW-TGL-NAS] CWWK 11th generation Core i5-1135G7: auto-start after AC power loss
- I9 12900HX in cwwk Q670
- CwwK W680 motherboard
- [Solved] CW-NAS-AMD-FP7-20G - NVMe drive keeps disappearing
- Bios CWWK 11th generation Core i3-1115G4/i5-1135G7/i7-1165G7