No SATA drives detected on CWWK CW-AT-10-8P (SFF-8643 to SATA)
Officially repliedHi everyone,
I’m having trouble getting SATA drives to work on my CWWK NAS motherboard CW-AT-10-8P N150 and SFF-8643 to 4× SATA. The cable was delivered with the board.
Problem: I tried multipe drives (SATA SSD and HDD) but none were detected by the BIOS.Was someone able to get that working? I tried several BIOS settings but without success? Any help or similar experiences would be greatly appreciated!
Hi
I had no problems getting the SATA drives working with this motherboard. They worked out-of-the-box, Seagate IronWolf Pro 16 TB. However I had a problem with the NIC 10Gbs. Going back to the BIOS version 2025-02-27 resolved for me the issue. The motherboard was delivered with BIOS version 2025-05-31.
You can find the BIOS version here: link . Double check with your motherboard.
你的猜测是对的。SATA硬盘不会显示在BIOS中;只显示NVMe硬盘。
这是因为SATA_SFF8643端口通过板载ASM芯片扩展，ASM芯片作为外部设备，不由PCH SATA控制器管理。因此，这些端口无法用于可启动驱动器。
- Missing Manual (CW-AT-10G-8P)
- No more boot of a CW-AT-10G-8P-N355 board
- Support for Large BAR (16GB) on CW-NAS-WL
- Howto_enable_Wake_on_Lan_on_CW-AT-10G-8P-N150
- cw-x86(n3160)-p1
- [HELP] SATA not detected, BIOS & fan header questions — AD12NR100 (N100)
- Technical Inquiry: Achieving PCIe 4.0 x16 (~31.5 GB/s) with CW-PCIe-8M2 (PEX88048) on CW-N
- CWWK x86-P6-N305 power unable to change power state of NVME drives - D3Cold to D0
- Latest BIOS CW-AT-10G-8P
- CW-AT-10G-8P-N150 stability issue
- Crucial DDR5-5600 only at 5200 MHz on CW-NAS-Q670-2L-8P-4M2
- BIOS: Flashing CW_ADLN_NAS V1.1 N355 with CH341a (CW-NAS-AT-4L)
- questions about the CW-AT-10G-8P board
- Correct BIOS for CW-AT-10G-8P N305
- CW-AT-10G-8P-N355 aqc113c 经常不识别