ChangWang Q670-8Bay NAS Mini ITX motherboard upgrade version
Hi,
I recently purchased and installed subject motherboard.https://cwwk.net/collections/nas/products/q670-8bay-nas-mini-itx-motherboard-upgrade-version-lga1700-supports-intel-12-14-generation-processors-8sata-4m-2-ddr5-dual-slots-5x-usb3-2-8-sata3-0-ports-i226lm-2-5g-with-vpro
While all is running as expected I have major trouble to setup AMT via VPro.
1. There is no information about which of the 2 LAN ports is the i226-LM.
2. It seems as one of the LAN ports is disabled or not functioning (might be the i226-LM).
The LAN port next to the HDMI ports working and I get network connection but, even though AMT is configured correctly in the BIOS my Unifi router is not picking up the manual assigned IP address for AMT.
As soon as I plug the LAN cable in the 2nd port (adjacent to the usb ports) I don't get any network connection at all, the port seems not functioning.
Which of the 2 LAN ports is the vPro-port and is it possible that this port is deactivated or the Bios being corrupt/faulty and disabling port?
Is there a newer BIOS version then the one I currently have installed?

Based on the product information you provided and the current BIOS screen, it appears that the issue is caused by updating the wrong BIOS version. Below is the correct BIOS link for you:
https://drive.x86pi.cn/BIOS/5.NAS-BIOS/Q670-NAS/CW-NAS-Q670-2L-8P-4M2
Good luck.
- 0Answer
- 0Follower
- 0Follow
- Informations on CWWK mini ITX motherboard
- Q670 12bay motherboard 3 LAN
- Q670 12-Bay NAS M-ATX Manual
- Cannot use pcie HBA on Q670 motherboard?
- Q670 White version Problems that may occur after ASPM is enabled
- Flashed CW-NAS-ADLN-KV10_noBootSATA_20240624 on N355 board version
- Q670 12-Bay NAS M-ATX Network Ports wrong description
- 9 185H NAS Motherboard 10G 10G
- N355 CW-TWLN-6L-MINI 當機問題
- J4125 4x Intel i226-V 2.5G Nics NAS Motherboard
- Crucial DDR5-5600 only at 5200 MHz on CW-NAS-Q670-2L-8P-4M2
- 4 TB M.2 SSD for Mini PC NAS 355 - MINIPC-P1
- N355 CW-TWLN-6L-MINI 无故重启问题
- How to enable 5600 memory speed on NAS-W680-10G motherboard?
- CW-X86-P5-V3-N305-not-booting-after-bios-upgrade