8845HS NAS 9 Bay PCIE x16 problems

2025-07-28 05:51:29

1 Comments

Hello,

When I use a riser cable with the 8845HS NAS motherboard x16 slot and GPU, I get stuttering and artifacting. The pcie slot is also limited to generation 2.0/1.1 using the riser cable. I have tried 4 different riser cables and 2 different GPU with the same result. GPU I am using is rtx 4000 ada. I have also tested with rtx 4060. Please assist me. Is there a BIOS setting to hard set link speed to generation 4.0?

Thank you,

Rohan

looddAdminCommunity worker

2025-07-29 21:31:14

Please note the use of a separately powered graphics card. This motherboard is primarily intended for NAS use. Regarding the link bandwidth issue, please try other models of graphics cards to see if the problem persists. What system are you using, and have you tried switching to a different system

Total 1Go to

Please log in to answer. Don't have an account? Register for one.

email-PQnSufKr6DVk178Nctf

0Answer
0Follower
0Follow