CWWK x86 P6 SATA disks
2025-06-18 23:49:48
164 Times read
3 Comments
Good evening I would like to buy the nas CWWK x86 P6 but I would like to use more sata disks. is there a reliable solution?
I see that there is problem with so recognised with sata adapter built-in...
CW-linCommunity worker
2025-06-20 09:56:25
Hello, you can add our wechat: +8613148568254 and we will provide you with a solution
2025-06-20 18:00:39
If you need more SATA interfaces to install HDDs or SSDs, you can use an NVMe-to-SATA6 expansion card based on the ASM1166 chip. It allows you to gain 6 SATA interfaces by sacrificing one NVMe slot.
Related topics
- CWWK X86-P6 Pocket NAS
- SSD_Config_on_CWWK X86-P6 N355
- CWWK X86-P6-V1-N355 m.2 E-Key support
- Bios/Driver for CWWK X86-P6 Board PC Intel i3-N355
- CWWK-X86-P6-N355_not_recognizing_4x_M.2
- NVMe random power failures on CWWK x86-P6 – D3cold and controller reset issues
- No SATA drives detected on CWWK CW-AT-10-8P (SFF-8643 to SATA)
- CWWK x86 P5 NVMe NAS Review
- NEED.x86.p6.driverForwin11
- CW-X86-P6 Ratio limits not working
- CWWK X86-P5-V3 No POST
- CWWK x86-P6-N305 power unable to change power state of NVME drives - D3Cold to D0
- X86-P6 N355 doesn't boost above 3Ghz
- CW-X86-P6-V1-N150
- CWWK x86Pi-P5/P6 MAX (upgraded) single NVME bandwidth