x86-P6_Multiple_Questions_about_development_board_and_pocket_nas

Hallo, 
i have a few questions about the x86 p6.

1.) How much current is the 5V Pin on the GPIO rated for? 1Ampere? 

2.) is there a datasheet available?

3.) is a 3d model available? (mainboard + m.2 adapter +heatsink?) Or at least exact measurements so i can build an enclosure?

4.) is the development board the same board as in the x86 p6 pocket nas? (i have seen 2 hdmi and 1 Hdmi but it says 2 hdmi, are there other differences?)

5.) whats the voltage of the fans? 5V or 12V?
6.) Whats included when i buy a development board? (fan adapter?. Sata cable? power supply?)
7.) is there a Heatsink + fan which i can buy seperatly (fan and heatsink for the normal p6 pocket nas for the development board)

8.) can IBECC memory be activated in bios?
9.) What voltage Level is the UART if there is even one? (i want to conecct a microcontroller to the pins on the board)
10.) Whats the ratet power of the m.2 adapter? does it have extra power? i wanna use 3x2TB SSD´s and a 10gbit nic (Aquantia AQC113) even if the speed can only handle 6Gbit.

Thanks in advance =)