M.2 Not detected

2025-04-20 17:50:38

3 Comments

I have a CWWK CW-ADLN-NAS motherboard that does not detect a M.2 Transcend 128Gb SATA SSD. The SSD was tested in another PC and is working. No changes I made in the BIOS fixed this.

Please help with any suggestions

looddAdminCommunity worker

2025-04-21 09:55:59

Hello, does your device have 4 NVMe adapters or 6 NVMe adapters?

AdministarorAdmin

2025-04-21 13:53:22

Hello, could you please tell me which port you have connected the 128Gb SATA SSD to on your CW-ADLN-NAS? I suggest you install Windows 11 after plugging it in to see if it can be recognized. The ADLN-NAS does not support traditional mode booting, and sometimes it can only be recognized after the system is installed. If it is connected to the SATA controller port, it will not be visible in the BIOS. Thank you. I hope you can provide more detailed information.

email-lDYOxrMywEnZFAZTwoLAuthor

2025-04-27 05:39:38

I managed to make it work using a NVME from Adata. Works fine so far.

Total 3Go to

Please log in to answer. Don't have an account? Register for one.

email-lDYOxrMywEnZFAZTwoL

0Answer
0Follower
0Follow