Power switch dead LED
I have a new install. The machine is a I7-1355U 6L - a 6 port router.
The power switch doesn't illuminate. I have another near identical machine - same MoBo but with an I5 processor. The power switch on that machine illuminates bright blue when powered on. The switch on the new machine functions - it turns the machine on and off, but doesn't illuminate.
The machine runs fine using the provided psu. I have a couple of nvme drives installed plus 64Gb of ram. Proxmox and a bunch of VM's run just fine. Just no front panel power indication.
Also, I have the bios to auto restart on power failure, but this doesn't seem to function - on the I5 when I first plug it in it powers sup, but the new I7 doesn't do that.
Do I have a faulty board?
Can the led be user replaced somehow?
Do I need to replace the MoBo?
- 0Answer
- 0Follower
- 0Follow
- CWWK x86-P6-N305 power unable to change power state of NVME drives - D3Cold to D0
- CW-NAS-ADLN-K N100 No power
- BIOS Settings for Power Saving: CW-AT-10G-8P-N350
- [Hardware issue?] PCIe slot completely dead — no NVMe, no network card detected — CWWK U30
- NVMe random power failures on CWWK x86-P6 – D3cold and controller reset issues
- [CW-TGL-NAS] CWWK 11th generation Core i5-1135G7: auto-start after AC power loss
- CWWK x86 P5 MAX - BIOS Issue after update – System not booting
- I am looking for a motherboard with dual channel ddr5 ram, two OS drives nvme, 4 Nvme
- Running CWWK Q670 LGA 1700 NAS Mainboard with 6x nvme and unRAID OS
- X86 P5 N100 4*M2 NVMe 上的 - M2 WiFi AE 键不起作用 X86 P5 N100 4*M2 NVMe - M2 WiFi AE key not working
- Case for CWWK 12th generation i5-12405H & 13th generation U300e Processon 10G full flash 4
- Topton N11 board with CWWK NAS board : bios support request
- CWWK X86 P5 Super Mini Router V3 N305 and TPU Coral Edge M.2 suppport
- CWWK Crazy A Small 6W TDP CPU Homelab Super System
- Does the AMD 8845HS NAS motherboard support 4k 120hz via DP?