CWWK x86 P5 NVMe NAS Review

CWWK x86 P5 NAS Review – SUPER COMPACT NVMe NAS?

nascompares Forum： https://nascompares.com/review/cwwk-x86-p5-nvme-nas-review/

Have you noticed just how diverse the world of DiY NAS has become? I’m old enough to remember when ‘Do It Yourself’ or Build Your Own’ (BYO) in the server world would mean converting an old PC case. Then things got SMALLER! The Rasperry Pi, the Mini PC and eventually we started to see consumer and hobbiest kit in NAS that was smaller than most domestic appliances and client hardware! But there has always been a trade-off with minimalization. Maybe it’s CPU power, CPU architecture, maximum memory or just plane old storage potential. This is where the CWWK x86 P5 steps into things. Build as a 64bit x86 alternative to Raspberry Pi devices, this architecture is not exactly new. Indeed, there are a slew of DiY/Open-Source ready Routers on the market built towards Pfsense and the like for years now, so what makes the CWWK x86 P5 something different? Well, it’s because this device shifts gears from being primarily about network management, and towards NVMe SSD Flash-based SSD storage. Running on an Intel N100 4-Core processor (N200 and N305 versions also available) that is rated at just 6W, the P5 supports up to 32GB of DDR5 memory and FOUR M.2 Gen3 SSD slots and 2 SATA drive connections (more eon that later). This all adds up towards a fantastically low power-consuming but highly capable system! Built with those with a DiY attitude, the system is a semi-bare board that is just ready to be scaled up and built into your next custom server setup with the likes of UnRAID and TrueNAS. But, is the P5 actually any good? Let’s discuss it in today’s hardware review.